With the development and popularization of the automobile industry, and electronic technology and computer use in the car lot on the car at higher degree of precision. How to quickly and accurately on the car fault diagnosis and analysis of enterprise technology to improve the level of service, efficiency and service awareness of the important signs.

Non-contact infrared thermometer with advanced infrared technology to quickly and accurately and easily measure the surface temperature of objects to help you quickly diagnose problems related to temperature. Infrared temperature measurement does not require direct contact with the surface of the measured object, you can quickly test the surface temperature readings, and can reliably measure hot, hazardous or hard contact surface temperature. Infrared thermometers measure the speed is very fast, a number of readings per second can be measured. Intuitively, continuous surface to test the temperature changes.

Car in motion if a failure occurs, or the existence of potential failure, would inevitably lead to changes in the surface temperature of auto parts or temperature mutation. Infrared thermometer in the car when the fault detection and diagnosis, and prone to sudden changes in temperature and temperature-sensitive components have to determine accurate, fast, effective and convenient to quickly find the auto parts failures. Therefore, the infrared thermometer in the car fault diagnosis is a very good diagnostic tool.

Concrete are used in the following respects:

Ignition system fault detection
Fuel pressure too low: scan multiple sites to determine the temperature low fuel pressure.
Ignition system failure: the case of the ignition coil through the work of non-performing multi-point scanning, to find fault lies.

Exhaust System Fault Detection
Incorrect air-fuel ratio adjustment: measurement and comparison of the exhaust system components to correct the air-fuel ratio.
Catalytic converter: catalytic converters at both ends of scan, compare the temperature difference.

Cooling System Diagnostics
On the overheating problem or need replacement parts to check
Radiator: radiator to check the internal core scan fastening and accurately determine the car radiator and the thermostat is blocked and the water temperature sensor is good or bad.
Thermostat: a simple measurement of the thermostat.
Coolant Temperature Sensor: Measure coolant temperature sensors, and multiple air temperature sensors.

Control of vehicle air conditioning system
Quickly and easily check the heater, air conditioning, ventilation holes of the fault
Heater / AC vents: Check the heating and cooling system performance and failure.

Braking system detects
After the test vehicle for some distance the brake shoe wear or failure of wheel bearings, if the temperature is significantly higher than the ambient temperature, then indicate excessive wear and tear.

In addition, the infrared thermometer on the brake system; bearings, bearing, one-way valve adapter and universal joints; seat heating systems; rear window defrost system; tire pressure and wheel correction, fault diagnosis and repair also has very obvious benefits. It can be said infrared thermometer in the modern automotive fault diagnosis is an important tool, not only accelerated the rate of fault detection, improve efficiency, but also enable the staff to work more secure.